News

What Are The 5 Major Advantages Of Full Lamination For Touchscreen?

Full lamination is also known as non-airgap. It is a way to seamlessly bond the touch screen and the display panel on the entire surface of the window area with water glue or optical glue. We widely use in G+G, G+F, P Bonding between Cover lens and TP boards of +G structure, bonding between TP boards such as OGS and LCM.Compared with the traditional frame sticking (mouth glue sticking) method, full lamination for touchscreen has the following advantages.

The 5 Major Advantages Of Full Lamination For touchscreen:

1.Better Display Effect

The full lamination technology cancels the air between the screens. It can greatly reduce light reflection and reduce the loss of transmitted light. Thereby increasing the brightness and enhancing the display effect of the screen.

2.The Touch Screen Is Insulated From Dust And Water Vapor.

The air layer of the ordinary bonding method is easily polluted by dust and water vapor in the environment. It affects the use of the machine. While the fully bonded OCA glue fills the gaps, it will closely attach the display panel and the touch screen together. Dust and water vapor have nowhere to enter, keeping the screen Cleanliness.

3.Reduce Noise Interference.

The close integration of the touch screen and the display panel can not only increase the strength. But the full fit can effectively reduce the interference caused by noise on the touch signal. Also it will improve the smoothness of touch operation.

4.Make The Touch Screen Body Thinner.

The fully laminated screen has a thinner body. The touch screen and the display are bonded with optical glue. It only increases the thickness of 25-50μm. It is 0.1-0.7mm thinner than the ordinary bonding method. The thinner module thickness provides greater flexibility for the design of the whole machine structure. And the thinner body improves the product grade and highlights the technical content.

5.Simplify assembly.

The assembly of the fully-fitting module and the whole machine can be directly fixed by means of buckles or locking screws. So It reduces the assembly problems caused by the deviation of the fit. At the same time simplifies the assembly process and reduces the assembly cost.