News

Touch Screen Manufacturers: What Are The Tips For Choosing Industrial Touch Screens CTP?

Now is the 21st century. More and more technology products appear in people's lives, and the national economy is constantly rising. In this era, touch screen manufacturers are very common. Why? Because touch screens are very much in demand now, do you know what are the skills of industrial touch screens? Please see the introduction of the following Industrial Touch Screens CTP manufacturers:

The Tips For Choosing Industrial Touch Screens CTP:

1.In order to ensure the normal operation of the touch screen system, in addition to ensuring the correct installation of the system software. You must remember not to install two or more touch screen drivers on a host. This will easily lead to conflicts when the system is running. The touch screen manufacturers thus make the touch screen system unable to operate normally.

2.When using a resistive industrial touch screen, if you find that the cursor does not move or can only move in a part of the area. You can check whether the touch area of the touch screen can be pressed by other touch objects. For example, once the touch screen is pressed by the display housing or the cabinet housing. It is equivalent to being touched continuously at a certain point. Then the coordinate position reflected to the controller is not accurate. Of course,it can't position the cursor correctly. If the cabinet shell presses the touch area, you can increase the distance between the cabinet and the display screen. If the touch screen manufacturer is the display case pressing the touch area. You can try to loosen the screws of the display housing a little bit.

3.If you are using a capacitive industrial touch screen. Then you first follow the request of the clarification book when you use it for the first time. Correctly install the driver required by the capacitive touch screen. Then use your finger to click "Start"/"Program"/"Microtouch Touchware" on the screen to run the screen calibration program. After you complete the calibration , the system automatically stores the calibrated data in the controller's memory. After restarting the system in the future, there is no need to calibrate the screen.

The infrared touch screen uses infrared on-off detection and positioning. The user chooses the baffle with good light transmission performance, and touches the screen manufacturer and treats it with anti-reflective treatment. Can get very good visual effects. However, due to the limitation of the volume of the infrared emitting tube, it is impossible to emit high-density infrared. Therefore, the resolution of this touch screen is not high.